Brake discs Skoda Yeti (5L) | Brembo


 Choose from a wide range of rotor configurations and surface finishes 4 different ways to be part of the Brembo world by simply replacing the discs on your Skoda Yeti (5L)

​Can you remember the day you left the dealer with your brand new Skoda Yeti (5L)? The braking system just needs a little care - replacing the discs and pads - to offer the same performance it did when it was new.
The choice is much harder than it seems, with so many different products and brands out there. When we decide to change something, we tend to pick the best known brands in the field which seem the most dependable. This is why it's important to choose a leading brand like Brembo, with its unmatched experience as a partner to the world's most prestigious car manufacturers for over 50 years.
Brembo knows everything there is to know about brakes, and has selected 4 different solutions to give your Skoda Yeti (5L) the best braking system possible. When you change the discs on your car, the pads are just as important! Worn pads could actually damage your new Brembo discs.


Brembo Original

The first alternative suggested is to fit your car with blank disks, which have already been chosen by millions of other drivers. The smooth surfaces of blank discs reduce brake pad wear and offer a safe, comfortable driving experience.
No need to worry - Brembo original disks are identical to the parts originally fitted to your Skoda Yeti (5L) when it left the dealer.
Ongoing research and development, laboratory and road testing and advanced production and distribution methods allow Brembo to offer a range of disks which, depending on the model of car, may also boast additional superior characteristics such as the exclusive Brembo pillar ventilation system, the higher damping coefficient of high carbon discs and a unique UV paint treatment.
PVT Pillar Vented Technology: to give you the best possible product for your money, Brembo has patented a special pillar ventilation system which reduces the risk of thermal cracking by 40%, to deliver even better performance than a disc with conventional vane ventilation technology.
High Carbon: the high percentage of carbon in the chemical make up of the cast iron used reduces the vibration and noise perceived on board the car.
UV paint treatment: boasting minimal environmental impact and superlative quality, Brembo UV painted discs set new a benchmark for replacement components, while the exclusive metallic finish give the disc itself an eye-catching visual impact.

All the Brembo brake discs specifically for your car can be found here

Find your nearest Brembo dealer

Brembo aftermarket disc in cast iron with pillar venting 


Brembo Xtra

The range of high performance cross-drilled discs offers the ideal solution for anyone who wants a premium braking system.
As well as making your car stand out from the crowd with their stylish looks, Brembo Xtra discs boast potent, effective braking performance in all conditions.
This superlative performance is made possible by the holes drilled into the rotor, which increase grip at the start of braking in particular, and in both high temperature and wet conditions. The holes also keep the pad clean by removing potentially dangerous debris. On top of everything else, the holes also allow gas and excess heat to be expelled from the disk, preventing dangerous brake fade.
These significant advantages go hand in hand with sporty looks, which are accentuated by the special UV paint treatment.

Find the right Brembo Xtra brake disk product codes for your model and version

Find out where to purchase Brembo Xtra disks

Brembo aftermarket disc in cast iron Xtra model perforated vented with UV paint 


Brembo Max

If you want to take the responsiveness of your brake system to the next level, you should seriously consider the option of moving up to stylish slotted disks.

The greatest advantage of Brembo Max discs is their superior friction coefficient, even during the very first moments of braking.
The slots cut into the disk rotor mean that glazed brake pads will be nothing but a distant memory.

One of the slots cut into the surface of Brembo Max discs is there to let you tell quickly and easily when the disc itself is worn.
When the disk is excessively worn, this slot disappears to indicate that it's time to replace the disk itself with a new component.

Find all the Brembo Max brake discs specifically for your car here 

Buy Brembo Max discs for your car here

Brembo aftermarket disc in cast iron Max model slotted and ventilated 


Brembo Sport

Brembo offers its Sport discs to all drivers who love to explore the capabilities of their car. Brembo Sport discs, available as cross-drilled or slotted variants, solve the problems of thermal expansion and warping.
When used with the specific brake pads from the same range, Brembo Sport discs offer the same durability and comfort as the best road-going disk together with class-beating performance.
Still not special enough for your Skoda Yeti (5L)? Have no fear, with their gold-colored galvanized surface coating, your Brembo Sport disks will be the envy of anyone who sees them.
Installation is no problem! These disks are manufactured with the exactly the same measurements as the parts fitted to your Skoda Yeti (5L) when you bought it.

Find out where to purchase Brembo Sport disks

All Brembo discs offer unrivalled quality. All you need to do is choose the product that suits your needs the best.

Brembo Sport disc in cast iron perforated galvanized in gold color with pillar venting 


The Brembo discs illustrated on this page are available for the following versions of the Skoda Yeti (5L)
Skoda Yeti 1.2 TSI2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Skoda Yeti 1.4 TSI/ 1.4 TSI 4x42010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Skoda Yeti 1.6/ 1.6 TDI2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Skoda Yeti 1.8 TSI 4x42009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Skoda Yeti 2.0 TDI/ 2.0 TDI 4x42009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018