Brake discs Seat Toledo IV (KG3) | Brembo

2/8/2019

Comfort, style, function or performance Not one but 4 choices to give your Seat Toledo IV (KG3) the best braking performance possible.

You'll never forget the day you bought your Seat Toledo IV (KG3). The braking system just needs a little care - replacing the discs and pads - to offer the same performance it did when it was new.
Only the uninformed would ever say that "one disc is as good as any other", convinced that all manufacturers use the same materials and processes - but nothing could be further from the truth! There are brands that have only been around for a short while, and others that continue to set the standard for innovation. This is why it's important to choose a leading brand like Brembo, with its unmatched experience as a partner to the world's most prestigious car manufacturers for over 50 years.
Here are 4 perfectly solutions for your Seat Toledo IV (KG3), picked by the world's leading brake specialists. Also remember to replace the pads as well: a worn pad could damage your new brake disc.

Brembo Original

Undrilled and without slots, Brembo Original disks are the simplest solution for replacing the worn disks on your car with quality products. Fitted with blank rotors, your Seat Toledo IV (KG3) will be a pleasure to drive. These disks also contribute to maximizing the lifespan of the friction material of your brake pads.
Brembo Original disks are the right solution for owners who want to fit their Seat Toledo IV (KG3) with the same disks it had when it left the factory.
Pillar ventilation, UV paint technology developed in collaboration with the carmakers themselves and a superior damping coefficient achieved by increasing the percentage of carbon used in the manufacturing process are additional advantages offered by the Brembo discs in this range.
PVT Pillar Vented Technology: pillar vented discs are 40 percent more resistant to thermal cracking than equivalent vane vented disks.
High Carbon: the increased percentage of carbon in the cast iron used to manufacturer Brembo High Carbon discs improves driving pleasure by reducing braking vibration and noise.
UV paint treatment: these discs feature a metallic effect finish which makes them more corrosion resistant, brighter and more elegant.

Find the Brembo Original disc brakes for your car here

Where to buy Brembo products closest to you

Brembo aftermarket disc in cast iron with pillar venting

Brembo Xtra

If you're looking for something a little more innovative for your Seat Toledo IV (KG3), why not choose cross-drilled discs?
You'll never go unnoticed with unmistakeable style of Brembo Xtra discs, which deliver outstanding performance in all braking conditions.
The holes drilled into the brake rotor significantly improve pad/disk grip, giving your Seat Toledo IV (KG3) precise, effective braking power at the start of braking in wet conditions in particular and at high temperatures. The holes also have a scraping action which removes potentially dangerous fragments of debris accumulating on the surface of the pad. Another advantage of these holes is that they dissipate heat and expel gas from the disc, preventing dangerous brake fade.
Looks matter too, and Brembo Xtra discs have an eye-catching style with a distinctive hole pattern and a protective UV paint treatment.

Find the Brembo Xtra disc brakes specifically for your car here

Buy Brembo Xtra discs car here

Brembo aftermarket disc in cast iron Xtra model perforated vented with UV paint

Brembo Max

Slotted discs represent an alternative solution for maximising the responsiveness of your brake system.

The main difference between Brembo Max disks and standard components is their ability to deliver outstanding performance right from the very first moments after you press the brake pedal.
Dreaded brake pad glazing will never be an issue again, as the slots cut into the rotor refresh the friction material on the surface of the pad every time you brake.

Among the many advantages offered by Brembo Max is a slotted pattern in the disk rotor which lets you monitor disk wear instantly and easily.
This innovative feature lets you check the state of your discs in a moment and decide when to replace them.

Discover the Brembo Max disc brakes for your car here

Buy Brembo Max discs for your car here

Brembo aftermarket disc in cast iron Max model slotted and ventilated

Brembo Sport

Brembo Sport discs are the ideal solution for owners who mix city driving with a more performance-oriented style. Designed to minimise overheating and the risk of warping, these discs are available with both cross-drilled and slotted rotors.
When used with the specific brake pads from the same range, Brembo Sport discs offer the same durability and comfort as the best road-going disk together with class-beating performance.
Brembo Sport discs are coated with a gold-coloured galvanised treatment, which gives your Seat Toledo IV (KG3) a high-tech, eye-catching appearance.
Installing Brembo Sport discs is nothing to worry about, as they are manufactured with the exact same measurements as the parts fitted to you Seat Toledo IV (KG3) the day you bought it from the dealer, making them inherently compatible with the original calipers and wheels.

The Brembo Sport disk distribution network

Your mechanic's opinion can certainly help you pick the perfect disc for your car, but one thing is for sure: the Brembo brand is synonymous with quality!

The Brembo discs illustrated on this page are available for the following versions of the Seat Toledo IV (KG3)

Seat Toledo IV 1.2/ 1.2 TSI	2012, 2013, 2014, 2015, 2016, 2017, 2018
Seat Toledo 1.4 TDI/ 1.4 TSI	2012, 2013, 2014, 2015, 2016, 2017, 2018
Seat Toledo 1.6/ 1.6 TDI	2012, 2013, 2014, 2015, 2016, 2017, 2018