Brembo unveils round 1 of the Superbike World Championship in Australia


 An in-depth look at the braking systems of the modified production on Phillip Island Grand Prix Circuit

​​​​​​​​​​​​​​​​​​​​​​​​​After the long winter break, the Superbike World Championship kicks off from the legendary Phillip Island Grand Prix Circuit. From 22 to 24 February, the Australian track will host the 1st round of the season. Opened in December 1956, is has hosted World Superbike races since 1990. With 55 races, it is the most used circuit of the World Superbike and the only one in the southern hemisphere.​

The decision to race in February, during the height of summer, ensures riders temperatures well above those of the MotoGP. In 2015 the races were contested with 30 and 31 degrees (air temperature), in the 2016 with 22 degrees and in 2017 during the second race with 24 degrees. Naturally, asphalt temperature was much higher: in the last 4 years it has never dropped below 29 degrees, reaching peaks of 44 degrees.​


According to Brembo engineers who work closely with 15 of the World Superbike riders, the Phillip Island Grand Prix Circuit is by far the least demanding circuit for the brakes. On a scale of 1 to 5, it earned 1 on the difficulty index, matched only by the Assen track.​​


Brake Use During the GP​​

The 4.445 meters that comprise the track wind around 12 bends, half of which are positioned along the section that grazes the cold waters of the Pacific Ocean. The riders make use of brakes 7 times each lap, a number that also calls into play the Chang International Circuit and Donington Park Circuit. In Australia, however, the total braking time is 21 seconds per lap, in comparison to the 28 seconds of the English track and 25 seconds of the Thai track. ​

From the starting lights at the chequered flag, the brakes are used to just under 8 minutes, thus avoiding the risk of undesired overheating: Average deceleration is also particularly low: only 1.07 g. Adding up all the forces exerted by a driver on the brake lever from start to chequered crossing flag gives a value of about 5 tons, equivalent to the weight of about 40 male koalas.​​​


The Most Challenging Stops​ ​

Of the 7 braking sections on the Phillip Island Grand Prix Circuit, none are considered very difficult on the brakes. However, 5 are rated medium and 2 are light. ​ ​

The first curve is the most demanding for the braking system, despite the use of brakes being contained to only 3.3 seconds. But the bikes get there after touching the peak of the World Superbike maximum speed at 312 km/h. To get down to 189 km/h, the bikes need a braking distance of 224 meters.​

Braking in curve 2 is slightly less demanding because the bikes lose a third of their speed: from 205 km/h to 134 km/h. Braking lasts for 2.3 seconds because the deceleration is less intense (only 1.2 grams) even if the load on the lever is 4 kg but lasts for only 105 meters.​​

Four kg and 200 grams of load on the lever are also needed for braking in curve 10: the starting speed is lower, however, only 164 km/h, and this explains the "mere" 83 meters and 1.6 seconds of braking.​


Brembo Performance​​​

In 2018, bikes fitted with Brembo brakes earned the Superpole and won at both races disputed at Phillip Island. In Race 1, on Saturday, all the of the top 6 motorcycles at the finish line had Brembo brakes while in Race 2 Brembo has secured all of the first 5 positions.​

In 7 championships riders who used Brembo brakes have claimed two victories at Phillip Island and have won the World Championship: Neil Hodgson in 2003, Troy Corser in 2005, Troy Bayliss in 2006 and 2008, Carlos Checa in 2011 and Jonathan Rea in 2016 and 2017.​