EASY CHECK DISC - SAFETY AT FIRST SIGHT 

Prove brake disc wear!

Europe's leading manufacturer has developed Easy Check, the brake disc that unites OEM matching quality with an exclusive system that proves  the state of wear, due to two holes of different depths: one by the MIN TH, the other a few tenths of a millimetre before the MIN TH.  

2 marks: OK.

Brake disc wear falls within the safety limits allowed.

1 mark: check!

The brake disc has worn down over 80% of its wearable thickness, therefore its volume of cast iron is proportionally reduced and the disc tends to reach higher operating temperatures. Check that its condition of use is normal, i.e. that there are no cracks, dark marks or deep scratches on the surface. Replace it within the next 5/10,000 km.

0 mark: replace!!

The disc has worn down all its wearable thickness, reaching or exceeding the minimum thickness marked on the disc (MIN TH). Replace it immediately so as not to affect the safety of the vehicle.

To guarantee maximum performance and comfort, Easy Check was put through rigorous tests under all conditions of use, which demonstrate its total reliability. It has also been approved by the German Federal Service for Road Safety.