Download the PDF file

CAUTION

Because the braking system is a safety component, personnel performing any type of replacement or maintenance must be competent and qualified.

- check that spare parts used for replacement  are suitable for the make and model of the vehicle;

- look at the groups of fiugures and identify the one that is most similar to the model of vehicle and the replacement part.

FOR CALIPERS	SEE GROUP OF FIGURES
with one pin and safty spring ring	I
with two pins and safety split pin	II
with one pin and safety split pin	II

During all the operations described below, the caliper brake fluid inlet hose must NOT be disconnected.

• AI remove the dust boot 1 (if present) with a screwdriver.
• A remove the safety pins 2 (if present) on the pin or pins, using a pair of pliers.
• B remove the guide pin or pins 3. If necessary, use a hammer and pin driver. Remove the spring 4, if not fixed to the pads, and the worn pads 5.